Unlike CDP Server products that are installed in one step, Data Center Console (DCC) requires some configuration *prior* to the installation as well as some additional manual steps *after* the initial install of the software package.
Read about the previous step here: [Prerequisites for Installing Data Center Console|Prerequisites for Installing Data Center Console].
Follow the instructions below to install and configure Data Center Console on Windows.
----
{toc:location=top|maxLevel=3|minLevel=3|type=flat|separator=pipe|style=border:1}
----
h3. Installing Data Center Console on Windows
1. Log on to the Windows server as a member of the local Administrators group.
{note:title=Notice}You should install Data Center Console on an independent host that does not have a CDP Server installed.
{note}
2. Navigate to the directory where you saved the Data Center Console installation file. The installer will have a name that is similar to the following:
* File name: {{R1Soft-CDP-DataCenter-Console-win64-4.2.0.exe}}.
{info:title=Note}
Make sure that you have a 64-bit version of the Windows operating system.
{info}
3. Execute the installer by double-clicking {{R1Soft-CDP-DataCenter-Console-win64-4.2.0.exe}}. In the next window, click "Run."
!Open file_Run button selected_English.png!
4. In the next window, select a destination folder and click "Install."
!DCC extraction_English.png!
5. Wait while the files are extracted.
6. The "R1Soft CDP Data Center Console Installer" window appears. Click "Install."
!DCC Installer_Install button selected.png!
7. Select the language for Data Center Console and click "Next."
!DCC wizard_English.png!
8. The next screen will display the "End-User License Agreement." Read it to the end, select the "I accept..." check-box, and then click "Install."
!DCC_License agreement_English.png!
9. The installer will check your system for possible problems.
!preinstall checks_2.png!
The possible values for the "Status" column are "Pass," "Not Recommended," and "Fail." It is preferable that all tests have a "Pass" status. However, it is still possible to continue the installation with a "Not Recommended" status. Click "Next."
10. On the next screen, choose the installation directory for the Console. It is safe to leave the default location unchanged. Click "Next" to continue.
!installation directory for the console_2.png!
11. Verify the HTTP and HTTPS ports for the Console. It is recommended that you leave the values unchanged. Click "Next."
!cdp server interface port selection_2.png!
12. The Console is ready to be installed. Click "Next."
!ready to install_2.png!
13. The installation process is complete. Click "Finish."
!install complete_2.png!
You will need to perform the following steps before you can launch the Data Center Console.
----
h3. Installing MySQL Java Connector
1. Download the MySQL Java Connector from the following website:
[http://www.mysql.com/downloads/connector/j/]
2. To the right of the "Connector/J 5.1.22" heading, click the download link for one of the following files:
* Windows: {{mysql-connector-java-5.X.XX.zip}}
* Linux: {{mysql-connector-java-5.X.XX.tar.gz}}
{info:title=Note}As of September 2012, the version used in this example is labeled "{{mysql-connector-java-5.1.22.zip}}."
{info}
!Java Connector 5.1.22 download page.png!
3. Follow the instructions for registration or log in.
!Java Connector_Log in form.png!
Alternatively, skip registration by clicking on the link labeled "No thanks, just start my download!"
!Java Connector_Link below.png!
4. You will be provided with the required mirror links. Download and save the file to a temporary directory or known location.
!archive save_5.1.22.png!
5. Extract the {{.zip}} or {{.tar}} archive in the location where you downloaded the file.
6. Look in the newly created directory for a file called {{mysql-connector-java-5.X.X-bin.jar}}. This is the file you need.
7. The connector is a {{.jar}} file. It is contained in the archive. After you have downloaded the archive, browse through its contents, locate the {{mysql-connector-java-5.1.16-bin.jar}} file, and copy it to the {{<DCC Installation Directory>/conf/database-drivers}} directory.
!Java Connector_contents.png!
----
h3. Configuring Database Properties
1. Go to {{<DCC Installation Directory>/conf}} and open the {{server.properties}} file. The contents of the file are as follows:
!server.properties file content.png!
2. Provide the appropriate values for the following database-related properties:
* *database-port* \- Set the database-port to "*3306*" (without quotes).
* *database-server* \- Set the database-server to "*localhost*" (without quotes).
* *database-username*, *database-password* \- Use your MySQL credentials for these values.
* *database-name* \- The name of the database created during the [prerequisites|Prerequisites for Installing Data Center Console] step.
* *database-poolsize*
* *database-test-interval*
3. Save the file.
----
h3. Starting the Data Center Console
Open the Windows Services Panel and start the "R1Soft Data Center Console" service.
!service start.png!
----
h3. Accessing Data Center Console for the First Time
1. Open a web browser and enter the following URL:
{code}http://localhost:8080{code}
2. In the login form, enter the default username ("admin") and password ("admin"), and then click "Login."
!DCC_login form.png!
{excerpt:hidden=true}Instructions on how to install and configure the Data Center Console.{excerpt}
Read about the previous step here: [Prerequisites for Installing Data Center Console|Prerequisites for Installing Data Center Console].
Follow the instructions below to install and configure Data Center Console on Windows.
----
{toc:location=top|maxLevel=3|minLevel=3|type=flat|separator=pipe|style=border:1}
----
h3. Installing Data Center Console on Windows
1. Log on to the Windows server as a member of the local Administrators group.
{note:title=Notice}You should install Data Center Console on an independent host that does not have a CDP Server installed.
{note}
2. Navigate to the directory where you saved the Data Center Console installation file. The installer will have a name that is similar to the following:
* File name: {{R1Soft-CDP-DataCenter-Console-win64-4.2.0.exe}}.
{info:title=Note}
Make sure that you have a 64-bit version of the Windows operating system.
{info}
3. Execute the installer by double-clicking {{R1Soft-CDP-DataCenter-Console-win64-4.2.0.exe}}. In the next window, click "Run."
!Open file_Run button selected_English.png!
4. In the next window, select a destination folder and click "Install."
!DCC extraction_English.png!
5. Wait while the files are extracted.
6. The "R1Soft CDP Data Center Console Installer" window appears. Click "Install."
!DCC Installer_Install button selected.png!
7. Select the language for Data Center Console and click "Next."
!DCC wizard_English.png!
8. The next screen will display the "End-User License Agreement." Read it to the end, select the "I accept..." check-box, and then click "Install."
!DCC_License agreement_English.png!
9. The installer will check your system for possible problems.
!preinstall checks_2.png!
The possible values for the "Status" column are "Pass," "Not Recommended," and "Fail." It is preferable that all tests have a "Pass" status. However, it is still possible to continue the installation with a "Not Recommended" status. Click "Next."
10. On the next screen, choose the installation directory for the Console. It is safe to leave the default location unchanged. Click "Next" to continue.
!installation directory for the console_2.png!
11. Verify the HTTP and HTTPS ports for the Console. It is recommended that you leave the values unchanged. Click "Next."
!cdp server interface port selection_2.png!
12. The Console is ready to be installed. Click "Next."
!ready to install_2.png!
13. The installation process is complete. Click "Finish."
!install complete_2.png!
You will need to perform the following steps before you can launch the Data Center Console.
----
h3. Installing MySQL Java Connector
1. Download the MySQL Java Connector from the following website:
[http://www.mysql.com/downloads/connector/j/]
2. To the right of the "Connector/J 5.1.22" heading, click the download link for one of the following files:
* Windows: {{mysql-connector-java-5.X.XX.zip}}
* Linux: {{mysql-connector-java-5.X.XX.tar.gz}}
{info:title=Note}As of September 2012, the version used in this example is labeled "{{mysql-connector-java-5.1.22.zip}}."
{info}
!Java Connector 5.1.22 download page.png!
3. Follow the instructions for registration or log in.
!Java Connector_Log in form.png!
Alternatively, skip registration by clicking on the link labeled "No thanks, just start my download!"
!Java Connector_Link below.png!
4. You will be provided with the required mirror links. Download and save the file to a temporary directory or known location.
!archive save_5.1.22.png!
5. Extract the {{.zip}} or {{.tar}} archive in the location where you downloaded the file.
6. Look in the newly created directory for a file called {{mysql-connector-java-5.X.X-bin.jar}}. This is the file you need.
7. The connector is a {{.jar}} file. It is contained in the archive. After you have downloaded the archive, browse through its contents, locate the {{mysql-connector-java-5.1.16-bin.jar}} file, and copy it to the {{<DCC Installation Directory>/conf/database-drivers}} directory.
!Java Connector_contents.png!
----
h3. Configuring Database Properties
1. Go to {{<DCC Installation Directory>/conf}} and open the {{server.properties}} file. The contents of the file are as follows:
!server.properties file content.png!
2. Provide the appropriate values for the following database-related properties:
* *database-port* \- Set the database-port to "*3306*" (without quotes).
* *database-server* \- Set the database-server to "*localhost*" (without quotes).
* *database-username*, *database-password* \- Use your MySQL credentials for these values.
* *database-name* \- The name of the database created during the [prerequisites|Prerequisites for Installing Data Center Console] step.
* *database-poolsize*
* *database-test-interval*
3. Save the file.
----
h3. Starting the Data Center Console
Open the Windows Services Panel and start the "R1Soft Data Center Console" service.
!service start.png!
----
h3. Accessing Data Center Console for the First Time
1. Open a web browser and enter the following URL:
{code}http://localhost:8080{code}
2. In the login form, enter the default username ("admin") and password ("admin"), and then click "Login."
!DCC_login form.png!
{excerpt:hidden=true}Instructions on how to install and configure the Data Center Console.{excerpt}