Follow the instructions below in Server Backup Enterprise or Advanced to add a new Control Panel Instance to a Policy.
*To add a control panel instance:*
1. Select the "Control Panels" tab in the "Policy Properties" window. You can do so while [creating a new Policy|Create policies], as shown below.
!Create New Policy_English.png!
You can also select the "Control Panels" tab in the "Edit Policy" window after the Policy has been saved and even run. See [Edit policies].
!Edit Policy_English.png!
2. On the "Control Panels" tab of the "Edit Policy" window, click on the "Add Control Panel Instance" button.
!Add Control Panel Instance button_English.png!
3. The "Add Control Panel Instance" window will appear. Familiarize yourself with the introductory information, and click "Next" to proceed with adding the Instance.
!Add Control Panel Instance_Introduction_English.png!
4. On the following "Instance Details" screen, you can define the options for your Control Panel Instance:
* *Enabled* \- Use this check-box to enable or disable the Control Panel Instance. If an Instance is disabled, it will not be discovered during replication, and Control Panel users will not be able to access their data from any recovery points created while the Instance is disabled.
* *Name* \- Define a name for the Control Panel Instance to identify it. A Control Panel Instance's name must be unique to its Policy, meaning that no more than one Instance associated with a Policy can have a particular name.
* *Description* \- Enter additional information about the Control Panel Instance. This information is optional, but if specified, it must also be unique to the Policy.
* *Type* \- This is the type of the Control Panel Instance. It specifies which type of Control Panel is being configured and can be defined as one of the following:
** *cPanel*
** *Plesk*
** *Virtuozzo*
** *Parallels Pro*
** *Interworx*
** *DirectAdmin*
** *Parallels H-Sphere*
** *Linux Home Directories*
** *Custom*
!Instance Details_Custom Type selection_English.png!
The "Custom" option allows you to add your own Perl script to use a new type of Control Panel. If using this option, you must fill in two additional fields: "Custom Auth Script" and "Custom List Users Script."
!Instance Details_script names_without bottom buttons_English.png!
Click "Next".
!Edit Control Panel Instance_Next button_English.png!
5. If your Control Panel is installed inside a Parallels Virtuozzo Containers (PVC) container, you need to specify the Virtuozzo Container ID (for cPanel, Plesk, Parallels Pro, Interworx, or DirectAdmin types). This advanced option is not available for the Virtuozzo Control Panel type.
Here, you should also choose one of the following verification log levels:
* *Alert*
* *Warning*
* *None*
!1cp.png!
6. Click "Next".
!Edit Control Panel Instance_Next button_English.png!
7. On the last "Summary" screen, the settings you have selected will be listed.
!Summary_for Custom selection_English.png!
8. You can verify the Instance before saving by clicking the "Verify Instance" button.
!Edit Control Panel Instance_Verify Instance button_English.png!
If the verification is successful, a dialog window will appear. Click "OK".
!success.png!
If the verification fails, the "Error Messages" window will appear. This means that Server Backup cannot find the Control Panel type you specified. Make sure you have selected the correct Control Panel type.
!Control panel instance failed verification_English.png!
Click "OK" and try to fix the error. Then verify the Instance again.
9. Once you have verified that the specified settings are correct, click "Save" to add your Control Panel Instance to the Policy.
!Edit Control Panel Instance_Save button_English.png!
10. The wizard screen will close, and the added Control Panel Instance will appear on the "Control Panels" tab of the "Edit Policy" window. Instance options are displayed in the appropriate columns.
!Control panel instance_added_without bottom buttons_English.png!
The following actions over the Control Panel Instance are available via the icons:
* *Edit* \- Allows you to change and add Instance options.
* *Verify Instance* \- Verifies that the Instance actually exists on the specified agent.
* *Disable* \- Disables the Instance. This will prevent the Instance from being discovered during replication, and Control Panel users will be unable to log in to Server Backup to retrieve their data.
* *Delete* \- Removes the Instance without prompting you to confirm.
11. Click on the "Save" button in the "Edit Policy" window to save your changes.
!savelast.png!
12. Once you have added the Control Panel Instance to the Policy, the system will display a direct link to Backup Manager for Control Panel users in the "Login" column. Using the link, users can access their backups and restore data as a {{.zip}} or {{.tar}} file. To log in, they must use their Control Panel credentials.
!2cp.png!
{excerpt:hidden=true}Instructions on how to add a new Control Panel Instance to a Policy in Server Backup.{excerpt}
*To add a control panel instance:*
1. Select the "Control Panels" tab in the "Policy Properties" window. You can do so while [creating a new Policy|Create policies], as shown below.
!Create New Policy_English.png!
You can also select the "Control Panels" tab in the "Edit Policy" window after the Policy has been saved and even run. See [Edit policies].
!Edit Policy_English.png!
2. On the "Control Panels" tab of the "Edit Policy" window, click on the "Add Control Panel Instance" button.
!Add Control Panel Instance button_English.png!
3. The "Add Control Panel Instance" window will appear. Familiarize yourself with the introductory information, and click "Next" to proceed with adding the Instance.
!Add Control Panel Instance_Introduction_English.png!
4. On the following "Instance Details" screen, you can define the options for your Control Panel Instance:
* *Enabled* \- Use this check-box to enable or disable the Control Panel Instance. If an Instance is disabled, it will not be discovered during replication, and Control Panel users will not be able to access their data from any recovery points created while the Instance is disabled.
* *Name* \- Define a name for the Control Panel Instance to identify it. A Control Panel Instance's name must be unique to its Policy, meaning that no more than one Instance associated with a Policy can have a particular name.
* *Description* \- Enter additional information about the Control Panel Instance. This information is optional, but if specified, it must also be unique to the Policy.
* *Type* \- This is the type of the Control Panel Instance. It specifies which type of Control Panel is being configured and can be defined as one of the following:
** *cPanel*
** *Plesk*
** *Virtuozzo*
** *Parallels Pro*
** *Interworx*
** *DirectAdmin*
** *Parallels H-Sphere*
** *Linux Home Directories*
** *Custom*
!Instance Details_Custom Type selection_English.png!
The "Custom" option allows you to add your own Perl script to use a new type of Control Panel. If using this option, you must fill in two additional fields: "Custom Auth Script" and "Custom List Users Script."
!Instance Details_script names_without bottom buttons_English.png!
Click "Next".
!Edit Control Panel Instance_Next button_English.png!
5. If your Control Panel is installed inside a Parallels Virtuozzo Containers (PVC) container, you need to specify the Virtuozzo Container ID (for cPanel, Plesk, Parallels Pro, Interworx, or DirectAdmin types). This advanced option is not available for the Virtuozzo Control Panel type.
Here, you should also choose one of the following verification log levels:
* *Alert*
* *Warning*
* *None*
!1cp.png!
6. Click "Next".
!Edit Control Panel Instance_Next button_English.png!
7. On the last "Summary" screen, the settings you have selected will be listed.
!Summary_for Custom selection_English.png!
8. You can verify the Instance before saving by clicking the "Verify Instance" button.
!Edit Control Panel Instance_Verify Instance button_English.png!
If the verification is successful, a dialog window will appear. Click "OK".
!success.png!
If the verification fails, the "Error Messages" window will appear. This means that Server Backup cannot find the Control Panel type you specified. Make sure you have selected the correct Control Panel type.
!Control panel instance failed verification_English.png!
Click "OK" and try to fix the error. Then verify the Instance again.
9. Once you have verified that the specified settings are correct, click "Save" to add your Control Panel Instance to the Policy.
!Edit Control Panel Instance_Save button_English.png!
10. The wizard screen will close, and the added Control Panel Instance will appear on the "Control Panels" tab of the "Edit Policy" window. Instance options are displayed in the appropriate columns.
!Control panel instance_added_without bottom buttons_English.png!
The following actions over the Control Panel Instance are available via the icons:
* *Edit* \- Allows you to change and add Instance options.
* *Verify Instance* \- Verifies that the Instance actually exists on the specified agent.
* *Disable* \- Disables the Instance. This will prevent the Instance from being discovered during replication, and Control Panel users will be unable to log in to Server Backup to retrieve their data.
* *Delete* \- Removes the Instance without prompting you to confirm.
11. Click on the "Save" button in the "Edit Policy" window to save your changes.
!savelast.png!
12. Once you have added the Control Panel Instance to the Policy, the system will display a direct link to Backup Manager for Control Panel users in the "Login" column. Using the link, users can access their backups and restore data as a {{.zip}} or {{.tar}} file. To log in, they must use their Control Panel credentials.
!2cp.png!
{excerpt:hidden=true}Instructions on how to add a new Control Panel Instance to a Policy in Server Backup.{excerpt}