Skip to end of metadata
Go to start of metadata

CDP Data Center Console allows you to monitor parameters of Policies on multiple CDP Servers at once. You can do so from the "Policies" screen.

Follow the instructions below to access the "Policies" screen.

1. Select "Policies" from the Main Menu.

You will enter the "Policies" screen.

The "Policies" List

The list of all Policies is displayed with the following columns:

  • Enabled - Graphically indicates the Policy status ("Enabled" or "Disabled"). If the icon is green, then the Policy is enabled. The red icon is used for disabled Policies.
  • State - Graphically indicates the Policy state. For more information about Policy states, see Using Data Center Console Dashboard.
  • Name - The name of the Policy.
  • Agent Name - The name of the Agent to which the current Policy belongs.
  • CDP Server - The name of the CDP Server to which the current Policy belongs.
    Note
    The server name is displayed in the form of a link. You can click the link for quick access to the CDP Server.
  • Frequency - Recurrence selected for running the Policy (On Demand, Minutely, Hourly, Daily, etc.).
  • Last Run Time - Date and time when the Policy was started last time.
  • Next Run Time - Date and time when the Policy will run next time according to the schedule.
  • Actions - This column contains the list of actions that can be performed over the Policy. See the description below.
Tip
Use "Pages Navigation" to look through the "Policy" list more efficiently.
The Policies Actions

The Policies list contains the "Actions" pane.

The following Actions are available:

Icon Action Description
Open CDP Server to view policies Click this icon to "drill down" to the specified CDP's "Policies" screen.
Edit Click this icon to edit the Policy properties. See Editing Policies in Data Center Console.
Run now Click this icon to run the selected policy. See Running Policies.
Archive now Click this icon to create the archiving Policy. See Creating Archiving Policies.
Disable Click this icon to disable selected Policy. See Disabling Policies.
Delete Click this icon to delete the Policy from the Console. See Deleting Policies.

You can perform some of the actions on several Policies at once by selecting them from the list using checkboxes and clicking the corresponding button at the top.

  • Edit Selected
  • Run Selected
  • Disable Selected
  • Enable Selected
  • Delete Selected

See the descriptions of these actions in the table above.

Filtering the Policies list

Basic List Filter

You can use a Basic List Filter to sort the Policies list. Click on the "Basic List Filter" button to access the filtering options.

1. Select the necessary options to filter.

  • State - Allows you to sort by the state (enabled/disabled).
  • Name- Allows you to sort by the Policy name.
  • Description - Allows you to sort by the Policy description.
  • CDP Server Name - Allows you to sort by the Server name.
  • Agents - Allows you to sort by the Agents.
  • Disk Safe - Allows you to sort by the Disk Safe.
  • Status - Allows you to sort by the Disk status.
    • Unknown
    • OK
    • Warning
    • Not OK

2. Select the type of search from the drop-down menu (Starts With/Contains/Ends With) and enter the Policy name//Server name/Description to the field. Select the status of Policy to show.

For example:

3. Click on the "Filter" button.

If you want to discard filtering options and view the whole list, click "Show All."

Advanced List Filter

The Advanced List Filter allows you to reduce the number of Policies in the list on the basis of filter options (criteria).

Follow the instructions below to apply the Advanced Filter to the Policies list.

1. Click on "Advanced List Filter" located in the Policy sub-menu.

2. The "Advanced List Filter" window will open.

There are several blocks with filter options.

Tip
You can hide/open the filter options for every block by clicking on the header of the corresponding block.

3. Define one or several filter options:

Identification

This block contains the same filter options as the Basic List Filter. See Basic List Filter above.

Scheduling

Contains the following options:

  • Frequency Type - Select this check-box to display Policies on the basis of their schedule.
    • On Demand
    • Minutely
    • Hourly
    • Daily
    • Weekly
    • Monthly
    • Yearly
Note
By default, all Frequency Types are checked and all Policies are displayed.
  • Last Run Time - Select this check-box to display Policies on the basis of the date when they run last time.
    • Begin - Select the first date in the date range. Use the pull-down calendar or type in the required date. The Policies that started on this date and after will be displayed. Example: Nov 27, 2010.
    • End - Select the last date in the date range. Use the pull-down calendar or type in the required date. The Policies that started on this date and before it will be displayed. Example: Nov 29, 2010.
  • Next Run Time - Select this check-box to display Policies on the basis of the scheduled date of the next running. 
    • Begin - Select the first time in the time range. Use the pull-down calendar or type in the required date. The Policies started at this time and after it will be displayed. Example: Nov 27, 2010.
    • End - Select the last time in the time range. Use the pull-down calendar or type in the required date. The Policies started at this time and before it will be displayed. Example: Nov 27, 2010.
  • Include policies that have not run yet - Select this check-box to display Policies that have not been run yet and the "Last Execution Time" is not defined.
  • Include policies without next execution time - Select this check-box to display Policies where the "Next Execution Time" is not defined, for example, with "On Demand" option selected.

4. Click on "Filter" to apply the filter to the "Policies" List.

Tip
Click the "Show all" link to see the whole Policies List. 

Errors

If one or more Policies run with errors, the "Error" icon is displayed in the upper area with a table of Policies status.

The Errors tab displays the number of all Policies and the Policies that are in a particular state. There are four states:

  • - Policies that are OK.
  • - Policies that are completing with alerts.
  • - Policies that are failing.
  • - Policies that are in an unknown state.

Click on the "Detail" icon to sort the Policies list according to the state of a Policy, or click on "Show All" to show the list of all Policies.

Details Pane

This pane provides you with detailed information about the Policy selected in the list. The following tabs are available:

  • Policy Settings
  • Data Retention
  • File Excludes
  • MySQL
  • SQL Server
  • Exchange
  • Control Panels
  • Advanced Policy Settings

Policy Settings Tab

Most of the presented data is the same as the data shown in the "Policies" list columns. The following information is available:

Policy
  • Name - The unique name of the Policy.
  • Description - Additional information about the Policy. This field is also unique.
  • CDP Server - The name of the CDP server.
  • Agent  - The name of the Agent.
  • Disk Safe - The name of the assigned Disk Safe.
  • Last Edited On - The date and time when the Policy was created or last edited.
  • Errors- Displays a message if any errors appear.
  • GUID- Identification number.
Scheduling

Data Retention Tab

  • Recovery Point Retention - Shows the Recovery Point Limit - the maximum number of stored Recovery Points. When the number is exceeded, the Recovery Points will be merged. See Merging Recovery Points.
  • Archive Point Retention - Shows the Archiving Schedule. See Creating Archiving Policies.

File Excludes Tab

Displays the "Files Excludes" rules for the selected Policy.

Columns:
  • Exclude Type - Graphically shows a type of the Exclude rule:
  • Recursive - If enabled, the exclude rule will be applied not only to the root folder files, but also to the files from sub-folders. Used only for advanced excludes.
  • Exclude Pattern - Depending on the type, in this column you can see files and folders to exclude or exclude mask.

See also: Excluding Files and Folders in Data Center Console.

Tip
You can filter the items shown on the tab by Exclude Type. Use the checkboxes at the top of the tab.

MySQL Tab

Displays the MySQL instances that are being replicated.

SQL Server Tab

  • Backup All Database - You may see here whether you have choosen to perform a backup or not.

Exchange Tab

  • Backup All Exchange Instances- Shows whether you have choosen to perform an Exchange backup or not.
  • Verify Exchange- Shows one of the options chosen before:
    • Never verify
    • Always verify
    • After every X successful backup
  • Verify Exchange Frequency - Appears if you have choosen "Verify after every X successful backup" option before.
  • Truncate Exchange Logs

Control Panels Tab

Displays the "Control Panel Instances" of the selected Policy.

Columns:
  • State - Current state of the Control Panel Instance. It can be defined as:
    • Enabled - To display only enabled Instances.
    • Disabled - To display only disabled Instances.
  • Type - The type of the Control Panel Instance, which specifies what kind of control panel is being configured. It can be defined as:
    • cPanel - To display Control Panel Instances of cPanel type.
    • Plesk - To display Control Panel Instances of Plesk type.
    • Virtuozzo - To display Control Panel Instances of Virtuozzo type.
    • Parallels Pro - To display Control Panel Instances of Parallels Pro type.
    • Interworx - To display Control Panel Instances of Interworx type.
    • DirectAdmin - To display Control Panel Instances of DirectAdmin type.
    • Parallels H-Sphere - To display Control Panel Instances of Parallels H-Sphere type.
    • Linux Home Directories - To display Control Panel Instances of Linux Home Directories type.
    • Custom - To display Control Panel Instances of Custom type.
  • Name - The unique name of the Control Panel Instance.
  • Control Panel Instance ID - The unique identification number of the instance.
  • Login - Contains the link to the page to log in and get an access to the certain Control Panel data.
  • Download Plugin

Advanced Policy Settings Tab

Displays the advanced settings of the selected Policy.

See Creating Policies in Data Center Console.

Labels:
data_center_console data_center_console Delete
Enter labels to add to this page:
Please wait 
Looking for a label? Just start typing.